Beginner's Guide: Engraved Wooden Calendar with the TwoTrees TTC-H40 CNC Router - DIY Home Decor Project
Let the project lead the tool choice. Use the TwoTrees buying guide to compare equipment for your next project.
Find your machine
In this article
If you’re looking for a simple yet artistic CNC woodworking project, this engraved wooden calendar is a great place to start. Using the TwoTrees TTC-H40 CNC Router, you can create a functional desktop calendar that doubles as a piece of furniture art. With its intuitive date module design, this project blends practicality with style—perfect for home offices, studios, or as a handmade gift.
Project Overview
- Project Title: Beginner’s Guide: TTC-H40 Engraved Wooden Calendar – DIY Home Decor
- Type: Home Decor / Artwork / Furniture
- Description: A simple perpetual wooden calendar engraved with the TTC-H40. Combines functionality with artistic beauty, serving as a unique decoration and conversation piece.
CNC Machine & Settings
- CNC Machine: TwoTrees TTC-H40
- Work Area: 1000 × 1000 × 100 mm (39.4 × 39.4 × 4 in)
- Material: Sapele wood
- Cutting Tools: 3.175 mm (⅛″) straight groove end mill
-
Feeds & Speeds (starting point for sapele):
- Cutting feed: 2000 mm/min
- Plunge feed: 1000 mm/min
- Depth per pass: 0.5 mm
Design & Files
- Design Software: Carveco
- File Format: STL
- Customization: Supports logo engraving and text personalization (names, dates, quotes)
Project Difficulty
- Skill Level: Beginner-friendly
- Completion Time: ~1.5 hours
- You’ll Use: Sanding, wood wax/oil finish, simple mechanical assembly
Media Assets
Finished Work Photo:

Video Demo: Watch on YouTube
SEO & Promotion
- Target Keywords: CNC Engraving Machine, CNC Woodworking, Perpetual Calendar, Desktop Calendar, Adjustable Calendar
- Suggested Article Title: Beginner's Guide: TTC-H40 Engraved Wooden Calendar – DIY Home Decor
Conclusion
This DIY engraved wooden calendar is the perfect starter project to explore CNC woodworking. With the TwoTrees TTC-H40, you’ll get precise, repeatable results and a stylish, customizable desk accessory—finished in under two hours.
FAQ
What wood works best for this project?
Sapele engraves cleanly and finishes beautifully. Other great choices: walnut, cherry, maple, or beech. For a budget option, use birch plywood with a veneer or stain.
Which bit should I use for clean lettering and lines?
A 3.175 mm (⅛″) straight or downcut end mill keeps edges crisp in hardwoods. For super-fine text or icons, swap to a 30°–60° V-bit and reduce depth per pass.
What feeds and speeds should I start with?
For sapele: 2000 mm/min, 0.5 mm depth per pass, ~18–22k RPM (if your spindle supports it). If you see tear-out or fuzz, lower the depth per pass or switch to a downcut. For V-carving, use shallower passes (0.2–0.3 mm).
How do I get darker, higher-contrast engravings?
Do a shallow finishing pass, then apply a dark wax, gel stain, or epoxy infill in the engraved areas. Sand back to reveal sharp, high-contrast details.
Can I customize fonts, dates, or add a logo?
Yes. Edit text and icons in Carveco before toolpathing. Use simple, bold fonts for small text to keep legibility after finishing.
How should I hold the workpiece?
Use screws on a spoilboard, low-profile clamps, or double-sided Nitto tape for thin panels. Ensure it’s flat and fully supported to prevent chatter.
Do I need dust collection or an enclosure?
Highly recommended. Hardwood engraving creates fine dust. A shop vac with a dust shoe improves visibility, surface quality, and cleanup.
What finish do you recommend?
For a warm look, use hardwax oil or Danish oil. For maximum protection, use polyurethane (wipe-on for thin, even coats). Always test on a scrap first.
Can the TTC-H40 handle hardwoods?
Yes. With sharp bits and conservative passes, hardwoods like walnut or maple engrave cleanly. Increase depth/feed gradually as your setup allows.